ISP based firmware Updates

Add RS-422 to a Controller node
rpu_bus
Posts: 188
Joined: Sun Sep 18, 2016 6:07 pm

ISP based firmware Updates

Postby rpu_bus » Fri Apr 21, 2017 2:10 pm

The shield is programmed with an ICSP tool. Normally I use an Arduino Uno with the [ArduinoISP] sketch from the IDE's examples. An Uno runs at 5V so I also need an SPI level shifter to program the 3.3V RPUadpt bus manager. I now have a board for this on [Tindie], it is called [ICSP] though it is not an ICSP tool it is an SPI level shifter.

[ArduinoISP]: https://github.com/arduino/Arduino/blob/master/build/shared/examples/11.ArduinoISP/ArduinoISP/ArduinoISP.ino
[Tindie]: https://www.tindie.com/products/ron-sut ... with-ioff/
[ICSP]: https://github.com/epccs/Driver/tree/master/ICSP

Return to “RPUadpt”

Who is online

Users browsing this forum: No registered users and 1 guest