Irrigate7 ^3 layout

ATmega1284p Controller /w pluggable connectors for 7LATCH, 7DIO, 2ICP, 4ADC
rpu_bus
Posts: 165
Joined: Sun Sep 18, 2016 6:07 pm

Irrigate7 ^3 layout

Postby rpu_bus » Wed Jun 28, 2017 1:20 pm

Not much changed, just moved J9 out so it does not interfere with the shield. I swapped the bridge test LED for a 5mm through hole version, so it could more easily be moved to an enclosure. Also added a pull up on IO9 so the current sources are defined when the m1284 pin is floating (i.e. at power-up, reset, and when not set as an output or pull-up).

Top.png
Top.png (64.56 KiB) Viewed 209 times


Bottom.png
Bottom.png (57.5 KiB) Viewed 209 times

Return to “Irrigate7”

Who is online

Users browsing this forum: No registered users and 1 guest